Quality above all else.

Application control.

1. STRUCTURE CONTROL
Designed to verify the variability of thickness, porosity, product density and the internal and surface structure of the coating.

2. COLOR AND COVERAGE PROOFING
From the internal color standard, RAL or Munsell, we make the corrections of each lot and also its coverage power.

3. ABRASION TESTS
All paints and varnishes pass the TABER abrasion test to ensure abrasion resistance above the NBR 14050 standard.

4. COMPRESSION TEST
All coatings are molded and tested to ensure high compressive and impact strength.

Field quality control.

5. IMPACT AND COMPRESSION RESISTANCE
With the sclerometer, we check, on site, the resistance of the sub-base before and after the coating.

6. HUMIDITY
Concrete’s humidity control is fundamental to ensure a good adhesion of the coating to its base.

7. ADHESION TEST
With Erichsen Adhesion, we check the degree of adhesion of the coating to the subbase, thickness of the coating and degree of impregnation of the floor.

8. MEASUREMENT OF CONDUCTIVITY
For dissipative and conductive coatings we measure surface ohmic and ground resistance.

industry